PWM cooling fan(s) control using ECM

[samckitt]

I ordered 15 sets the last time I ordered the PWM module connectors to sell as pairs. But the place I ordered from said that was all the parts that make up the assembly that theirs doesnt require the white piece. Not sure how watertight it would be.

[SlowProgress]

So does the female side have the gasket shown in the junkyard version you posted back around page 24 or so?

[/QUOTE]

If so I would be interested in the mating female connector pins and the seal (shown here in orange).

Scott

[samckitt]

Originally Posted by SlowProgress

So does the female side have the gasket shown in the junkyard version you posted back around page 24 or so?



If so I would be interested in the mating female connector pins and the seal (shown here in orange).

Scott

The only seals I have are the ones for the wire to connector body. I have emailed the place I ordered them from to see if they have the gaskets.

[SlowProgress]

Originally Posted by samckitt

The only seals I have are the ones for the wire to connector body. I have emailed the place I ordered them from to see if they have the gaskets.

Thanks for all the good information guys. I won't be wiring until later this year so let me know on the gasket if you hear back. It sounds (and looks) like you have everything else right there.

PWM Controller - I think it was clear earlier but just in case anyone is confused this fan has the controller integrated into the fan motor housing.

Scott

[andrewb70]

Originally Posted by SlowProgress

.....

PWM Controller - I think it was clear earlier but just in case anyone is confused this fan has the controller integrated into the fan motor housing.

Scott

Scott,

Do you know the exact specifications as to what the controller is looking for?

Andrew

[SlowProgress]

Originally Posted by andrewb70

Scott,

Do you know the exact specifications as to what the controller is looking for?

Andrew

I haven't gotten that far yet. I figured when I get there I would try to get in touch with Spal, or bug someone smart like Mikels. I don't even have the ECU installed yet.

Scott

[andrewb70]

Originally Posted by SlowProgress

I haven't gotten that far yet. I figured when I get there I would try to get in touch with Spal, or bug someone smart like Mikels. I don't even have the ECU installed yet.

Scott

Scott,

Please post whatever information you can find. The CTSV fan seems like a good value give the output and the fact that the PWM controller is built into the assembly.

Do you happen to have rough dimensions? Also, if you have more picture of how the fan is mounted to the radiator, that would be appreciated.

Andrew