PWM cooling fan(s) control using ECM

[SlowProgress]

Originally Posted by andrewb70

Scott,

Please post whatever information you can find. The CTSV fan seems like a good value give the output and the fact that the PWM controller is built into the assembly.

Do you happen to have rough dimensions? Also, if you have more picture of how the fan is mounted to the radiator, that would be appreciated.

Andrew

Andrew the fan just mounts with six screw (three each top and bottom). The radiator is actually sort of designed around the fan. There is also a bracket in front to mount the Vintage Air condenser.



The overall fan and radiator height is around 22 inches.



The width of the fan is around 24 inches and the radiator tank outside to outside is about 28.5 inches.



You know the guys at C&R are really helpful. If you asked for the drawing in .PDF I think they would share it with you.