Mario, send me some contact info and a list of all the parts/vendors, or companies who you think the car might be a good fit for. I'll forward it to a few people, and see if I can get Steve Rupp to help too. It's a top notch car, and I'm sure it will find a place inside!
Good luck Mario,this car should be in a glass showcase because it's that nice,I would in no way park this one outside.I can't imagine there not being a long list of vendors wanting this car in their booth.
Inside is best. Toms Chevelle was in the worse spot outside there is.
The traffic get real tight in that area.
However being inside you won't be safe from the guy that thinks your paint job cost $5k.
I've seen crazy stuff happen inside.
__________________
1969 Camaro LS2/T56 D1SC www.automotivedesigneng.com
Special thanks to: DPE Wheel / Columbia Parts Company / US Collision / T. Bruning
Inside is best. Toms Chevelle was in the worse spot outside there is.
The traffic get real tight in that area.
However being inside you won't be safe from the guy that thinks your paint job cost $5k.
I've seen crazy stuff happen inside.
Exactly Bob! Will just have to wait and see . The way it looks we may not have to worry about it.
No nothing yet Curtis . Troy's been hard at it trying to get something. A couple of our members are trying to help and I even put a call to Mr Stielow to see if he had any contacts. Its a wait and see at this point. It sounds crazy but time is running out SEMA is around the corner.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Mario
Hybrid Mode
