69 Corvette Road Race Build - Lateral-g Forums

Neil B · #1 08-23-2016, 08:38 AM

Quote:

Originally Posted by Panteracer

Just got back from the montery historics
and took a couple of pics of some vettes

Bob

Thanks for the pics Bob!

Panteracer · #2 08-23-2016, 04:10 PM

Neil
you are welcome

Bob

NOPANTS68 · #3 08-24-2016, 10:05 AM

This car could be my favorite C3 of all time. Colors, wheels, and details are just bitchin. Car looks meaner than a mother in law.

Neil B · #4 08-25-2016, 05:35 AM

Quote:

Originally Posted by NOPANTS68

This car could be my favorite C3 of all time. Colors, wheels, and details are just bitchin. Car looks meaner than a mother in law.

Thank you very much!

Neil B · #5 09-08-2016, 06:37 AM

Well, after 8 months of having to find a new roll cage fabricator, an emergency out of town work assignment, and a city water main replacement project in front of my driveway, the car finally came home today. I'm looking forward to the wiring and interior project, as I have never done that type of work before.

**WSSix** · #6 09-08-2016, 06:52 AM

Congrats! The car looks great, Neil. Be sure to document your wiring so you can trouble shoot it in the future without having to trace all the wires.

Neil B · #7 10-04-2016, 02:45 PM

Here is the mock up of the driver's seat and steering wheel. I chose a Momo Prototipo wheel and mated it to an NRG short hub and quick release. The quick release was a must-have with the Kirkey race seats and side pipes. I will be using the stock Tilt/Tele column. The tilt mechanism had some play in it so I pulled it out and replaced the lower knuckle/lock shoe pins, column sphere, and upper/lower bearings. I'm retaining the turn signal switch but the ignition and starter switches will be relocated to the dash.