I didn't care for the AMD stamping into the door jamb so I cut it back off and used my OEM door jamb, APITA but it looks so much better. One the bright side I knew where the jamb was placed by GM cuz all the welds I drilled out ... so I just screwed it back in place and went from there.
I also made the lower quarter to rocker panel turn in cuz AMD didn't do that right either.
And I finished assembling the sub frame and then wrapped it in plastic wrap to keep it from getting grit and crap on it .... 200 yds?
Thanks for taking the time to stop in. sorry I didn't have any more time to visit. But always good to meet your customers.
Thanks for the support
Blake I do appreciate the time to walk around and ask questions, I know you are a busy man so I'll catch you at a show or an autoX. Ya know I asked my oldest son if he wanted to go for a ride in Roger's 69 and he said "No, I want to ride in yours!" Atta boy!
Quote:
Originally Posted by tubbed69
That subframe sure looks good,I have heard a lot of good things about Bryce Canyon.
Thanks, yeah Bryce Canyon was awe inspiring, the amphitheater gets the most traffic and was stunning in the colors and shear size. Reminds us how small we really are!
MY goal for today was get that dang quarter panel on for the last time! Mission accomplished, sprayed SPI epoxy to all bare metal yesterday and then prepped the panels to receive 3m panel bond today and clamped it in place. Only took two years to attach the quarter panel ... not planned that way, but yeah it's done now!
Went ahead and sprayed the outer wheel houses while I had some epoxy mixed up, there are next to install for the last time!