Little bit, got the front on and some support bars in.
I notched the existing frame structure to accept the 2x3" rails of the clip. The car is locked down, so made careful measurements and cuts to fit everything nice and tight.
So after fitting, took some measurements and everything was way off. WTH? Turns out Ron sent the front blueprint with a different ride height than everything else. So back out, lower the sub and fix and fill in all the careful cutting and fitting, then refit. Lots of time wasted here.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
WOW!
Hybrid Mode
