Here are the Part Numbers for the GM PWM Module Connector

[andrewb70]

Originally Posted by Obsin71Ls1

Old66Tiger, Andrew, et al. I wanted to say thanks for sharing these part numbers. I can't tell you how many hours I spent scouring the internet for them before giving up (this was before this thread). I owe you guys a beer

Thank Bob for the heavy lifting. I was the one that managed to track down the little terminal for the PWM signal cavity.

Andrew

[Larry R]

I would like to add my thanks to those who are responsible for getting the part numbers for the necessary connectors for the PWM module.
FWIW, I was doing some perusing and ran across this:
http://www.rockauto.com/en/moreinfo....1432165&jsn=10
It is a PWM module with wiring harness from Rock Auto.

[andrewb70]

Originally Posted by Larry R

I would like to add my thanks to those who are responsible for getting the part numbers for the necessary connectors for the PWM module.
FWIW, I was doing some perusing and ran across this:
http://www.rockauto.com/en/moreinfo....1432165&jsn=10
It is a PWM module with wiring harness from Rock Auto.

Thanks for posting that. Always good to have options. That other round connector is made by Yazaki I believe. It would be nice to find the part numbers and a source for other side...

Andrew