Chassisworks crossmember 400/200-4r/4l60

[mrgto69]

Originally Posted by fishface

Forgot I still have this. Surely someone needs it! Lol

I know this is an OLD posting, but do you still have the cross member?...

[Heather1124]

I'd been trying to figure out what crossmember I need for the 200 4R. The website only lists this as fitting the Turbo 400. Will any crossmember for the Turbo 400 work for the 200 4R?

[mrgto69]

Originally Posted by Heather1124

I'd been trying to figure out what crossmember I need for the 200 4R. The website only lists this as fitting the Turbo 400. Will any crossmember for the Turbo 400 work for the 200 4R?

The TH400 is it's own crossmember. I have one in my 69 FB with a newly rebuilt 200-4R and the end of the pan hits. I was going to modify my crossmember to fit, but people are trying to convince me to purchase one like this.

[Heather1124]

Originally Posted by mrgto69

The TH400 is it's own crossmember. I have one in my 69 FB with a newly rebuilt 200-4R and the end of the pan hits. I was going to modify my crossmember to fit, but people are trying to convince me to purchase one like this.

So this one is supposed to fit without drilling new holes or any modification besides the adapter for a stock subframe? I'd like to keep from drilling holes to modify something if I can. Have you heard of any others that would work? I have a 68 camaro and I'll be getting my engine and transmission in a few months. Any advice is much appreciated!