1967 Camaro Project Update

[nicks67ca]

Getting some painted parts back! Need to get time to finish the firewall and subframe connectors

[nicks67ca]

Firewall fill plate just about in. Need to finish some bottom a little but its just about done.

Tack


ground down



up next Sub frame connectors and Engine mock up and frame down bar installation!

[nicks67ca]

I also test fitted the Holley mid length ls swap header. 1 7/8" primary with 3" collector. Need to verify in the car with mast pan and speedtech mounts, and steering shaft.

[Mikael A]

Very cool...how do you like that frame,was considering getting one.

[Spiffav8]

Car is coming along and looking good!! Keep at it.

[nicks67ca]

Got some stuff done.

DSE subframe connectors are in
Down bars are in. I decided to weld them in with a removable tube adapter and the plates welded to the firewall. I have some clean up to do still. Next is to finish the trans tunnel with the speedtech cover then power wash / steam the underside and get the whole thing ready for undercoating and firewall paint.

[Mikael A]

looks great