DBW pedal mount 1st gen Camaro

[ironworks]

Originally Posted by DT69Cam

The only problem (if ya can call it that) is many guys including myself have the master and steering column installed already. Also I heard of complaints with the rubber around the column interfering with your plate and as a result the plate is not flush with the firewall. I do not know if the plate was trimmed to avoid this though. Just looking for options here that's all.

Yeah its large and will need to be cut around the column. We always smooth firewall there to get rid of the ugly factory firewall mount for the column.

I would get everything you need mounted in the car, remove it and trace the clearance you need and then trim the pedal bracket to clear whatever set you want. The firewall is not flat there unless you make it flat in the fabrication stage.

[DT69Cam]

Originally Posted by ironworks

Yeah its large and will need to be cut around the column. We always smooth firewall there to get rid of the ugly factory firewall mount for the column.

I would get everything you need mounted in the car, remove it and trace the clearance you need and then trim the pedal bracket to clear whatever set you want. The firewall is not flat there unless you make it flat in the fabrication stage.

Thank you very much.

[SlowProgress]

I modified the GMPP pedal bracket and cut the plastic pedal off and welded the stock one back on. You can see in the build thread around #195. I had to make a small bracket and spot weld to the firewall. Mine is not yet painted so anything you dream is easy that way!

https://lateral-g.net/forums/show...&postcount=195

[DT69Cam]

Originally Posted by SlowProgress

I modified the GMPP pedal bracket and cut the plastic pedal off and welded the stock one back on. You can see in the build thread around #195. I had to make a small bracket and spot weld to the firewall. Mine is not yet painted so anything you dream is easy that way!

https://lateral-g.net/forums/show...&postcount=195

Thank you Scott, I did read and have been following your thread. Great info!!!

[Bmf5150]

I built a bracket for mine,look at this link page 38
http://ls1tech.com/forums/conversion...grades-38.html

[DT69Cam]

Originally Posted by Bmf5150

I built a bracket for mine,look at this link page 38
http://ls1tech.com/forums/conversion...grades-38.html

That is awesome!, Thanks!!

[Bmf5150]

Hope it helps

[NvrDun71]

I have a spare gmpp LS pedal bracket like SlowProgress posted above I would sell if you were interested in going that route