Roadster Shop SPEC chassis for 1967-69 Camaro

[Mkegs14]

which oil pan fits the spec chassis? I'm in the process of building a L92/LS3 top end motor. So its the 6.2L gen IV *LS motor. Thanks for your help

[randy]

i would have went with this if i didn't already buy all the dse stuff. Great value

[Roadster Shop]

Originally Posted by Mkegs14

which oil pan fits the spec chassis? I'm in the process of building a L92/LS3 top end motor. So its the 6.2L gen IV *LS motor. Thanks for your help

The Mast motorsports swap pan is what we use and what we suggest using

[70ptta]

Any plans for a second gen f body spec chassis?

[Mkegs14]

What long tube headers fit in the spec chassis for a LS3?

[heinz57]

Quick question.
The Camaro in the video is it the same one shown on your web site with the old frame rails removed?
I would prefer this on my 1969 with a spec four.
thanks

[Roadster Shop]

Originally Posted by Mkegs14

What long tube headers fit in the spec chassis for a LS3?

We offer a mid length header that we use for the LS

Originally Posted by heinz57

Quick question.
The Camaro in the video is it the same one shown on your web site with the old frame rails removed?
I would prefer this on my 1969 with a spec four.
thanks

I don't know of the exact one on our website you are referring to, however the car in this thread as well as all of the other SPEC camaros retain the factory rear frame rails, could have been a FAST TRACK install that you might have seen, shoot me a picture and Ill be glad to help

Originally Posted by 70ptta

Any plans for a second gen f body spec chassis?

At this time no, due to the floor constraints of the second gens

[Mkegs14]

the mid length headers, are those the hooker ones on "Georges 69 Camaro" build archive pictures?

Cause the other archives for spec camaro chassis seem to have to have long tube headers, or were those custom made for that build?

[Kid-Canada]

I recently purchased one of your spec chassis and am new to the fourm and have been searching for products to work with the chassis but the fact this chassis is relatively new to the market having a hard time. I am looking for some advise as you have built a few cars with this chassis and your the manufacturer. Is there some recommended or must need products and suppliers that you guys have found to fit with this chassis the literature provided is great but I found missing some key elements that could have been included for the average hobbyists like things to complete the build fuel system, cooling system, brake products aside from Calipers. I am going to be installing a LS3 and tremic t-56 magnum. Some insight would be great!