I don't know WTF I was thinking. Had the rendering hanging on the wall, 3' away from where I was working and I still went down that angular path.
That right there explained to me why I see cars being worked on with a copy of the rendering tapped to the part they are working. Total light bulb moment.
__________________ Curtis
Pilots: We're not better than you, just way cooler.
Made some more progress on the rear bumper. Ended up rebuilding the sides again, just trying to get the shape right and symmetrical. Templates and a laser have it pretty darn close! I'm in the middle of the lower radius'd part. Made a wood jig to shape the lower corner. I will finish it all by the weekend.
Pretty good progress this weekend, passenger side is complete. Spent a fair amount of time doing some clean up of the driver side just to ensure complete symmetry.
Working out the details of the tail lights, location, mounting, etc.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
