1967 Camaro Project Update

[nicks67ca]

Some better shots of how I made the pocket. There maybe better ways but this works for me.

Initial slices and pushed in



Welded up



Ground down

[nicks67ca]

I also started on my trans cover. It was backed up from a few different trans I had on there. I needed to make the speed tech one longer to cover the hole I had.



Still need to work on fitment but here is how it well live in the car

[Dave95z28]

Thanks for the pics and explanation.

Dave

[nicks67ca]

Originally Posted by Dave95z28

Thanks for the pics and explanation.

Dave

Anytime!

[slimjim]

you're making me regret powder coating my subframe BEFORE even buying the engine

[nicks67ca]

Originally Posted by slimjim

you're making me regret powder coating my subframe BEFORE even buying the engine

Everything is close but clear. I wanted the added insurance. Are you using the fbody accessory drive?

[hifi875]

looks clean w a/c down low and out of the way.

[slimjim]

Originally Posted by nicks67ca

Everything is close but clear. I wanted the added insurance. Are you using the fbody accessory drive?

I was planning to, but nothing is certain yet, I'm still trying to decide between dropout, crate ls3 376/525 or lsx376-b8

[waynieZ]

Originally Posted by slimjim

you're making me regret powder coating my subframe BEFORE even buying the engine

That's what happened to me, and I'm with you had to cut it.

nicks67ca, Nice fix, a lot easier then what I was thinking.Won't even know it was done.

[nicks67ca]

Thanks Wayne.