COMP Cams 40th Anniversary Camaro at V8 Speed & Resto Shop

[V8TV]

Tilt column





Heidt’s 4-link rear suspension final installation. Note the 3M coating on the bottom of the car.





Steering installation





Front sway bar installed



Emergency brake and axles installed

[V8TV]

Soon, the car is a roller again and it heads back to the body shop for final bodywork and priming.





The removable panels, hood, decklid, fenders, doors, valances, etc., are cleaned and hung in the booth for final priming.

[waynieZ]

Nice work guys, it's looking good.

[gofastwclass]

This is turning out very well.

[V8TV]

Originally Posted by waynieZ

Nice work guys, it's looking good.

Originally Posted by gofastwclass

This is turning out very well.

Thanks guys!

[V8TV]

Inside the body shell, the crew installed the mounting bracket for the Vintage Air Gen 4 air conditioning system. Although the Vintage Air kit comes with screw-in hangers, we find that welding the brackets to the inside of the car allows us to tuck it up as high as we can and make for a cleaner installation.



No that the exterior panels have all been bodyworked and are straight, the body shop crew turns to detail items like the dashboard, firewall, door jambs, and cowl areas.

[V8TV]

The backsides of panels are stripped and sanded in preparation for a black Axalta epoxy primer and Imron topcoat.









The outside panels were all sanded to a 180 grit surface. The body tub was then rolled back into the paint booth and masked for another coat of high build primer.