What are you using for + buss bar power junction? need some ideas please

[dhutton]

I’m using the one in my third link. I’m simple minded so I try to keep things simple...

That combined with the bulkhead pass through in the first link gives me everything I need. Let’s me keep my Vintage Air connections inside the car.

Don

[rocketrod]

I mounted a power distribution block, see first link, on the firewall near the master cylinder.

http://www.madelectrical.com/catalog/cn-1.shtml

I also added a power relay module nnear the the driver driver sidee radiator support that provided two fused 60A circuits, one for battery power and another for ignition power. I used to power the fans, A.C. relay, headlight relays, fuseblock, etc., etc.
https://www.waytekwire.com/item/4609...e-Module-60A-/

[gerno]

I went to West Marine and bought something like this for my grounds and positives for fans at the front on the engine bay. I then ran 2 10g wires to feed it. Only issue is its not covered for the positives but haven't had any issues.

https://www.westmarine.com/search?Ntt=buss

[65 Drop Top]

Fused distribution block