Wire loom

[Musclerodz]

I like to use heat shrink when building looms from scratch. If I use techflex, I will either use heat shrink on the ends or a chemical tape that once activated its takes a razor blade to get it off. I have also wrapped looms in electrical tape for more factory look. It all depends on the job and budget.

[NickBurns]

Originally Posted by Musclerodz

I like to use heat shrink when building looms from scratch. If I use techflex, I will either use heat shrink on the ends or a chemical tape that once activated its takes a razor blade to get it off. I have also wrapped looms in electrical tape for more factory look. It all depends on the job and budget.

Always respected your stuff ! I went with painless classic ... sharp bends its going to separate a bit ....... I guess


Sent from my iPhone using Tapatalk

[ilikeike]

Download the Techflex catalog, they make every type you might want, Hi temp, abrasion protection, heat, flame resistant...


https://cdn.techflex.com/assets/pdfs...talog-2015.pdf