Camaro LT5

[Stielow]

This should be a cool build. Love the GM crate motors. I’m going to lean on this one a bit because I know we can make 900 hp easy.


Sent from my iPhone using Tapatalk

[jeff71]

Plan to have it ready for SEMA?

[Stielow]

Originally Posted by jeff71

Plan to have it ready for SEMA?

2020


Sent from my iPhone using Tapatalk

[WSSix]

Very cool. I had no idea the LT5 existed. Good luck with the build, Mark.

What color are you planning? If you care to share at this point that is.

[MtotheIKEo]

Have DSE made any revisions to their subframe over the years? I know you have used them continually, is the subframe in this build the same as what was in the car 4 builds ago?

[Stielow]

Originally Posted by MtotheIKEo

Have DSE made any revisions to their subframe over the years? I know you have used them continually, is the subframe in this build the same as what was in the car 4 builds ago?

They have changed the following

New aluminum knuckles. DSE has their own forging now

Redesigned the front sway bar bushing by adding a collar of rubber to eliminate sway bar clunk

Redesigned the sway bar arm to go to a forging

DSE made their own rack

I've never had an issue with one. They work great.

Mark

[fleet]

Now we just need another Streetking build here ..now that thankfully Camaroking is back with this droolworthy project.

[NAPA 68]

Originally Posted by WSSix

Very cool. I had no idea the LT5 existed. Good luck with the build, Mark.

What color are you planning? If you care to share at this point that is.

X twooooo

[214Chevy]

I'm tuned in....

[will69camaro]

Can’t wait to see how this one turns out!