I spoke with a PRW tech this morning and he had me verify my flywheel counterweight was bolted on in the correct position and had the correct part number stamping. Apparently, there are 2 positions. I verified my weight IS in the correct position and I have the correct part stamp. He advised me to remove the weight and verify it weighs 156.1 grams, which I'll do this evening. He says if it's a few grams or more off, it could cause vibration.
nicks67ca- Thanks for the tip. I really hope I don't have to pull the engine and tear it down.
Daniel
|
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode