67 Nova Project "Resurrection"

[TomM]

See if any of these help

T,

[Gmachine1911]

Originally Posted by TomM

See if any of these help

T,

All I can say is "Wow"! I appreciate this info more then you can know. I was especially sweating positioning the firewall/floor pan supports as they are used to attach the subframe so this information is invaluable. Thanks for taking the time to post it up! I've definitely got some reading material to sift thru now

[wiedemab]

Tom - that's some nice details - -thanks for sharing. Mine is a page from an old frame spec manual that Dad saved (Old bodyman - saved all sorts of good stuff!)

[TomM]

You guys are welcome.....don't remember exactly where I got these, years of scouring the internet I suppose.......Novas are kinda my thing......

Following along on the build on Steve's as well......glad you are bringing her back...I'd do the same thing....

T,

[Gmachine1911]

Ok, been a minute since I had any real progress to post on the Nova but here goes. Also, my account got changed up somehow and I wasn’t able to login until now so big shout out to Camcojb for getting me squared away!

So I’ve been accumulating more parts and finally got some time over the last two weeks to work on the car. I actually took a few days off this past week just to get some stuff done.

Got the old package tray out, new one cut to pieces for the DSE mini tubs and mocked up in the car.

[Gmachine1911]

After getting the mini tubs and new outer wheel house fitted up, I mocked up the rear quarters, tail panel, trunk and filler panel to be sure things were on track.

[Gmachine1911]

Next, I got started removing the old upper cowl panel (what was left of it) as well as the inner and outer side cowl panels...