Project "Redfire" 69 Camaro

[67_camaroRS]

Originally Posted by redfire69

More progress, assembled engine, BBC mild build 400HP/500TQ, should be very streetable...

Wow, I like the choice of sticking to an old school brute big block chevy. What brake booster and MC are you running?

[Spiffav8]

Car is looking sweet!

[redfire69]

Originally Posted by 67_camaroRS

Wow, I like the choice of sticking to an old school brute big block chevy. What brake booster and MC are you running?

Thanks! I'm using the S10 master cylinder AC 18M974, tuff stuff booster 2229NC, rod kit 4750, and DSE booster bracket 050302.
This setup would be close to the old DSE kit. The hole in the firewall needs to clearanced in a oval shape for the M/C boot. Links below:

https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
or
https://www.summitracing.com/parts/ado-18m974/overview/

https://www.summitracing.com/parts/tff-2229nc

https://www.summitracing.com/parts/tff-4750

https://www.summitracing.com/parts/dsr-050302/overview/

[redfire69]

So I'm back at it and I've got the dash cluster loaded with Dakota Digital gauges. I used a heater delete panel and mounted my VA heater controls which I think turned out pretty good. I got the idea for mounting the BIMs on ABS from Mark S.

[redfire69]

A couple pics of the dash wiring harness done, cluster installed with disconnects. Steering column, shifter, VA heater, and BIMs wired.

[WSSix]

Glad you're back on it! Good luck with it.

[redfire69]

I couldn't find an off the shelf package available with the brakes I wanted, so I built it myself. 3.50 31 splines, Moser housing and axles, Wilwood 4R 13 inch brakes with internal parking brake. Gotta love bolting together all new parts!

[redfire69]

Front brakes installed: Wilwood 6R C6 - 14 inch rotors. Completely worth the 6 week wait!