Camaro LT5 - Page 7 - Lateral-g Forums

**Stielow** · #61 10-09-2019, 08:00 AM

The have the new QA1 shock and the new Holley LT5 accessory drive mocked up. The shocks are cool because the have big knobs for quick running. The other set up required removing the wheels. I look forward to testing them.

The new Holley LT5 accessory drive uses the GM LS9 power steering pump. The power steering pulley has its own large bearing to take the blower belt load. The power steering pulley is splined and inserts into the power steering pump.

Sent from my iPhone using Tapatalk

ArisESQ · #62 10-09-2019, 07:52 PM

Have you run QA1 shocks before?

**Stielow** · #63 10-10-2019, 04:15 AM

Quote:

Originally Posted by ArisESQ

Have you run QA1 shocks before?

I have not. The parts look nice and I like the idea of driving to an open track day on soft shock calving. The cranking the shocks to a track set up.

The JRIs are great shocks but you need to pull a front wheel to adjust them.

I’ll find out next summer how they work.

Mark

Sent from my iPhone using Tapatalk

**Stielow** · #64 10-23-2019, 04:55 AM

Sled Alley is timing up all the sheet metal. This always takes longer that I expect.

Sent from my iPhone using Tapatalk

randy · #65 10-23-2019, 07:55 AM

What intercooler pump did you use this time or in the past? Also any need for a icebox or do you just typically run a factory supercharger reservoir?

NAPA 68 · #66 10-25-2019, 05:07 PM

WOW........that blower lid is up there! Is the plan your trademark cowl hood? Enjoying the build as always.

**RSNAKE** · #67 10-27-2019, 10:00 AM

Mark, are you using any electronic traction control? If so, which system?

I am wondering if the Lingenfelter LNC-2014 RPM Limiter Timing Retard Launch Controller GM Gen V DI Engines LT4 LTI L86 L8 will work with the Davis system and the LT5?

**Stielow** · #68 10-27-2019, 10:29 AM

Quote:

Originally Posted by RSNAKE

Mark, are you using any electronic traction control? If so, which system?

I am wondering if the Lingenfelter LNC-2014 RPM Limiter Timing Retard Launch Controller GM Gen V DI Engines LT4 LTI L86 L8 will work with the Davis system and the LT5?

I don’t use traction control. I do it the old fashion way... with my foot.

Sent from my iPhone using Tapatalk

**Stielow** · #69 11-01-2019, 05:09 AM

Matt is doing a great job on the sheet metal. It alway amazes me the you buy a rust free California car and all the stuff that needs attention. Car had sat for years and was in primer. 95% solid but it the last 5% that eats all the time.

Sent from my iPhone using Tapatalk

JD67SS · #70 11-01-2019, 07:16 AM

Is Sled Alley doing the paint, or are you having Dutchboys shoot it?

JD