Camaro LT5

[jmac]

Wow! You've been busy! Those brake lines look great, I can't believe how close the balancer is to the cross member.

What's going on in the rear? I see two catch cans/vents, one for the gas tank and one for the rear? What's that next to the Vaporworx controller?

Thanks for sharing!

John

[Stielow]

Originally Posted by jmac

Wow! You've been busy! Those brake lines look great, I can't believe how close the balancer is to the cross member.



What's going on in the rear? I see two catch cans/vents, one for the gas tank and one for the rear? What's that next to the Vaporworx controller?



Thanks for sharing!



John

The two canisters are from Two Much. One is the vent for the fuel tank and the other is the vent for the diff.

Their are two fuel pump controllers. One is the GM from the LT5 crate engine harness the 2nd is Vapor Worx to run a second fuel pump for E85 capability.

Matt and the Gang at Sled Alley are doing a great job.




Sent from my iPhone using Tapatalk

[Stielow]

Originally Posted by jmac

Wow! You've been busy! Those brake lines look great, I can't believe how close the balancer is to the cross member.



What's going on in the rear? I see two catch cans/vents, one for the gas tank and one for the rear? What's that next to the Vaporworx controller?



Thanks for sharing!



John

The balancer has clearance. We jogged the brake lines to allow a bigger lower pulley. We are going to notch the frame for more clearance.





Sent from my iPhone using Tapatalk