More New stuff

[cwylie]

Originally Posted by MODO Innovations

We have added 5 new part numbers to our product line.

Have you installed, our planning to install, a LSX/LTX drivetrain in you vehicle?
You mount your DBW accelerator pedal and now your pedals don't match.
We have the solution.

We are proud to offer these new pedal covers that match the DBW accelerator pedal (GM part number 10379038). This accelerator is also commonly know as the CTS, the Cadillac or the GMPP pedal.

Please see our website for more information.

https://modoinnovations.com/collecti...y-pedal-covers

Thanks for looking

Do you need the weld on plates for a first gen camaro or can you just drill the holes?

[MODO Innovations]

Originally Posted by cwylie

Do you need the weld on plates for a first gen camaro or can you just drill the holes?

The weld on plates are more of a universal fit. They were made for folks that want to put these pedal covers on....let's say a 3rd or 4th gen Camaro or a 67-72 C10 truck or any other vehicle that we don't make them to fit.

For the 1st gen Camaros and all others that we have fitments for, you would remove the rubber pads, drill thru your factory pedals and install them with the supplied hardware..

Thanks

[Spiffav8]

I like it!

[randy]

I like mine. Nice matching set. Instead of using the nuts i drilled and tapped my pedal. Put a dab of silicon and installed them.