70 Camaro - Boise, Idaho - Lateral-g Forums

**Goosesdad** · #11 08-09-2020, 08:00 PM

Sprayed some red paint just to help with seeing air bubbles while laminating. Not using any gel coat here -- it's just a splash mold, so not really necessary in my opinion.
Name: 11.jpg
Views: 660
Size: 55.0 KB

4 coats of wax, 2 coats of PVA mold release, laminated with 4 layers of cloth. Then drilled for rivets.
Name: 12.jpg
Views: 662
Size: 76.8 KB

Mold removed and busted out the balsa plug.
Name: 13.jpg
Views: 662
Size: 73.6 KB

Cut open for laminating.
Name: 14.jpg
Views: 650
Size: 67.0 KB

4 coats of wax, 2 coats of PVA mold release, then riveted the mold to the headliner.
Name: 15.jpg
Views: 666
Size: 57.2 KB

Green sheen is the PVA.
Name: 17.jpg
Views: 667
Size: 69.0 KB

Laminated with 1 layer each of 3/4 ounce and 1 1/2 ounce mat. Mold removed. A little clean up and primer on the way.
Name: 18.jpg
Views: 685
Size: 109.8 KB