This is MY 67 Camaro

[Sonar Chief]

Originally Posted by 214Chevy

Nice work!! Keep it up...

Thanks, will do ...

Grit er Dun .... sanded the underside one more time and epoxied and then sprayed some ss black, heck yeah!!!






The hardest thing is keeping the ash off the fresh paint, APITA!!!

Thanks for looking ....

[WSSix]

Great work. Better hurry as that cold weather will snap soon.

[Sonar Chief]

Originally Posted by WSSix

Great work. Better hurry as that cold weather will snap soon.

Thanks, buddy and boy did the weather turn ... from 70's to 30!


Well make a goal and Got the radiator mount painted a single-stage black along with the Speed Tech inner wheel wells and then mounted driver's side to see what interference with the clutch master cylinder ... needs a hole to clear master and AN3 fitting.

Looking like a car again ...






While the weather was good I got some putty on the fender and sprayed some SPI epoxy on the driver's door and passenger fender and left in the garage with a heater on overnight to cure the paint ...




Still needs a layer or two of primer/ surfacer and sand down w 400 grit!



Hopefully I'll get the door hung and semi straight before long and then get the rest of the front end sheet metal installed and aligned.


Thanks for looking ...

[syborg tt]

Car is looking good and I am going to steal some idea's from your build for my car. Keep posting pics and looking forward to your next post.