...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 12-05-2020, 09:30 PM
Beechy's Avatar
Beechy Beechy is offline
Senior Member
 
Join Date: Nov 2014
Location: Melbourne, Australia
Posts: 261
Thanks: 106
Thanked 99 Times in 71 Posts
Default

Quote:
Originally Posted by Stielow View Post
A fuel tank needs room to vent. If not I’ll add an expansion tank. The issue in the summer we pump 70 degree fuel into a car when it is 90 degrees out side. The fuel expands and fills the TooMuch vent. OE ad a dome or expansion area for this. In hot rods we want all the fuel volume we can get.
OEMs have a"dead man" in a fuel tank......basically an inverted pie tin with a pinhole in the top surface.
When you thought you'd filled the tank, air is still trapped in the pie dish void and the fuel nozzle cuts out. The pinhole allows controlled venting to occur, so that when the fuel increases in temperature and volume (now that it's out of the ground), it swells into that void and doesn't puke out the vent lines.
THATS WHY YOU DON'T TOP OFF AFTER THE FIRST CLICK.

TOOmuch vent chamber gives the liquid/air time to settle out and is a great feature........but can't cope with massive west-coast changes in temp out of the ground vs. cooking in 95* ambient.

Aftermarket tanks don't have this feature.
Competing claims to the largest volume compared to the competition?

Carl?
__________________
Jim Grant
Melbourne, Australia
(Dual citizen)
Reply With Quote
The Following User Says Thank You to Beechy For This Useful Post:
Fluid Power (12-30-2020)
  #2  
Old 12-05-2020, 10:16 PM
marine15Z28 marine15Z28 is offline
Junior Member
 
Join Date: Dec 2016
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Where did you get those rotors Jhook slotted?
Reply With Quote
  #3  
Old 12-06-2020, 04:11 AM
Stielow's Avatar
Stielow Stielow is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Posts: 2,522
Thanks: 29
Thanked 2,283 Times in 614 Posts
Default

Quote:
Originally Posted by marine15Z28 View Post
Where did you get those rotors Jhook slotted?

Arron Oberle did them for me. He also made the emblem, dash bezel and shifter ring. Great guy and great parts. Working with him was some of the funnest part of this build.


Sent from my iPhone using Tapatalk
__________________
Stielow Engineering
Reply With Quote
  #4  
Old 05-24-2021, 10:39 AM
cpd004's Avatar
cpd004 cpd004 is online now
Senior Member
 
Join Date: Feb 2006
Posts: 348
Thanks: 131
Thanked 27 Times in 20 Posts
Default

Quote:
Originally Posted by Beechy View Post
OEMs have a"dead man" in a fuel tank......basically an inverted pie tin with a pinhole in the top surface.
When you thought you'd filled the tank, air is still trapped in the pie dish void and the fuel nozzle cuts out. The pinhole allows controlled venting to occur, so that when the fuel increases in temperature and volume (now that it's out of the ground), it swells into that void and doesn't puke out the vent lines.
THATS WHY YOU DON'T TOP OFF AFTER THE FIRST CLICK.

TOOmuch vent chamber gives the liquid/air time to settle out and is a great feature........but can't cope with massive west-coast changes in temp out of the ground vs. cooking in 95* ambient.

Aftermarket tanks don't have this feature.
Competing claims to the largest volume compared to the competition?

Carl?
I'm sure it may be still early to tell, but we've had a few 80+ degree days, so wondering how the fuel tank system is working out as far as smell/expansion, etc.?
__________________
1971 Firebird
2017 SS
Reply With Quote
  #5  
Old 05-24-2021, 11:26 AM
EVIL SS EVIL SS is offline
Member
 
Join Date: May 2020
Location: Chicago West Burbs
Posts: 76
Thanks: 252
Thanked 12 Times in 12 Posts
Default

Mark, what is this?
Attached Images
 
Reply With Quote
The Following User Says Thank You to EVIL SS For This Useful Post:
glr0212 (06-15-2022)
  #6  
Old 05-24-2021, 11:57 AM
Stielow's Avatar
Stielow Stielow is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Posts: 2,522
Thanks: 29
Thanked 2,283 Times in 614 Posts
Default

Quote:
Originally Posted by EVIL SS View Post
Mark, what is this?

It is a power steering fluid filter. Good idea that did not work. I removed the filter cartridge and left the can to keep the hoses the same.

Might of been too fine of a mesh.

Mark


Sent from my iPhone using Tapatalk
__________________
Stielow Engineering
Reply With Quote
The Following User Says Thank You to Stielow For This Useful Post:
fleetus macmullitz (05-24-2021)
  #7  
Old 05-24-2021, 11:58 AM
EVIL SS EVIL SS is offline
Member
 
Join Date: May 2020
Location: Chicago West Burbs
Posts: 76
Thanks: 252
Thanked 12 Times in 12 Posts
Default

Quote:
Originally Posted by Stielow View Post
It is a power steering fluid filter. Good idea that did not work. I removed the filter cartridge and left the can to keep the hoses the same.

Might of been too fine of a mesh.

Mark
Got it, thanks! Car came out great!! Thanks for sharing!
Reply With Quote
  #8  
Old 05-24-2021, 11:54 AM
Stielow's Avatar
Stielow Stielow is offline
Lateral-g Supporting Member
 
Join Date: Dec 2004
Posts: 2,522
Thanks: 29
Thanked 2,283 Times in 614 Posts
Default

Quote:
Originally Posted by cpd004 View Post
I'm sure it may be still early to tell, but we've had a few 80+ degree days, so wondering how the fuel tank system is working out as far as smell/expansion, etc.?

My tank set up worked with no issues.


Sent from my iPhone using Tapatalk
__________________
Stielow Engineering
Reply With Quote
The Following User Says Thank You to Stielow For This Useful Post:
cpd004 (05-24-2021)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 04:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net