Transcona, the Dirty Old Cougar

[egoman]

The system here only allows 10 pics so here are the rest to go with the subject.
https://lateral-g.net/forums/attachm...1&d=1618786985

[214Chevy]

I enjoying every minute of this build. Lots of bad a$$ery going on here...

[egoman]

With a new day I forged ahead with the welding when I felt it was perfect. I also heated and pulled the frame back to straight with a little water and a lot of straight edges and levels. Welding those upper brackets caused a lot of pulling.
https://lateral-g.net/forums/attachm...1&d=1619307718

[egoman]

The rest

[egoman]

This post is my first that I am writing where I didn’t already have a description made up. We are bridging the UCA mounts and developing a LCA coilover mount that is a temporary substitute. I will from now on write less here and insert more text into the pictures.
https://lateral-g.net/forums/attachm...1&d=1619394909

[egoman]

I have a ton of pictures for this segment. I am going to spread them out over a few posts. Normally when I put the photos together that is just one day of work. The previous post along with this one and maybe one or two more are that ONE day of work.
https://lateral-g.net/forums/attachm...1&d=1619395502

[egoman]

Remember the last 3 posts equate to a single day of work. Plus this one!
https://lateral-g.net/forums/attachm...1&d=1619395923