2nd Chance Camaro - Let the Project Begin - Lateral-g Forums

**syborg tt** · #1 05-15-2021, 04:20 AM

So way back when there was a Sema Show I saw this really cool electric e-brake kit. I am going to have to talk with Tobin and see what he thinks and if he has a bracket as I have no interest in creating a bracket.

Back to working on the fuel lines.

Test fitting the coolant lines and AC lines so the inner fender had to go back on the car.

I also re-ran the battery power but it will have to be shortened so I can add a cut off switch.

adding back the grounds

Does anyone know if they make black headlight rings ?

I found some black line clamps that I may consider using.

and of course I accidently found the lost washer for the door latch that I dropped a couple weeks ago. Good thing I took my shoes off in the garage after one of my rides and stepped on it with my heal. Ouch !!!

**fleetus macmullitz** · #2 05-15-2021, 05:10 AM

MJ,

That was informative AND entertaining; that bit about the washer...

rv1890 · #3 05-15-2021, 07:46 AM

Nice build! Where did you get the stainless radiator hose clamps that are on the car now? The look like a standard worm gear but Tbolt fastener. Thanks.

MtotheIKEo · #4 05-15-2021, 10:07 PM

The wilwood electric parking brake looks like a nice piece. I used Tesla electric park brake calipers with a auto up/down power window kit and it has been working great. A few wires running to the caliper look a lot nicer and was a lot simpler than the cables, brackets, and pedal/handle.

**Goosesdad** · #5 05-18-2021, 12:13 PM

Mounds??? We are no longer friends

linenoise · #6 05-18-2021, 01:28 PM

He always has random candy in his posts, wondering if he works for a candy company or what?
This is one of the my favorites in LatG projects.

**syborg tt** · #7 05-19-2021, 07:22 PM

Quote:

Originally Posted by Cosmo mentis

MJ,

That was informative AND entertaining; that bit about the washer...

It made a nice clicking sound when I was walking and I laughed as I have used my leaf blower countless times to clean out the garage floor.

Quote:

Originally Posted by rv1890

Nice build! Where did you get the stainless radiator hose clamps that are on the car now? The look like a standard worm gear but Tbolt fastener. Thanks.

I spent the better part of last night looking and trying to figure out where I got them and no luck. I searched my Amazon, Ebay, Summit and Jegs order history and found nothing. I will be back in the garage tomorrow night (I hope) and look through all of the old receipts.

Quote:

Originally Posted by Goosesdad

Mounds??? We are no longer friends

Please tell me you not an Almond Joy man !!

Quote:

Originally Posted by linenoise

He always has random candy in his posts, wondering if he works for a candy company or what?
This is one of the my favorites in LatG projects.

I have been looking at the next thing to do after I get out of what I am currently doing and I think you may be onto something.

**syborg tt** · #8 05-19-2021, 08:07 PM

Quote:

Originally Posted by rv1890

Nice build! Where did you get the stainless radiator hose clamps that are on the car now? The look like a standard worm gear but Tbolt fastener. Thanks.

One is from Advanced Auto and the other is from Summit Racing

jarhead · #9 05-20-2021, 03:31 PM

Well Marty, it only took me a little over a week to go from start to finish ( I had to get caught back up again).

I really enjoy the detail and all the pictures. This is a fantastic project, and of course I love dogs

**syborg tt** · #10 05-21-2021, 10:55 AM

Quote:

Originally Posted by jarhead

Well Marty, it only took me a little over a week to go from start to finish ( I had to get caught back up again).

I really enjoy the detail and all the pictures. This is a fantastic project, and of course I love dogs

Hey Joe,

Thank you and funny I have been doing the same thing with threads lately for inspiration and idea's.