2nd Chance Camaro - Let the Project Begin

[syborg tt]

Since I keep the car on the optima charger when it is parked in the garage I decided to mock up the wire and see if I could hide it when it's not in use.





I can easily tuck it in the frame rail when not in use.

[syborg tt]

Today I will be working on all of the various ground wires.

My goal is to make then looks nice and I even have some company in the garage today.







Ground wire from the block to the frame





Wires running back to the battery ( I think I have a cool idea and I hope to share it soon )







Securing the ground wire to the motor mount bolt.





I am finally connecting the wires from the relay to my gas tank.















I also purchased this bad ass headlight switch from a gentleman on Facebook. I am going to have it anodized
black so it blends in with the Covan dash insert.



I have been looking for Intake Tube idea's and I think I found one that I love.

[syborg tt]

Another reminder while I am here to powder coat the spring pocket and the lower arms.



The fuel lines runs right over the spring pocket and I am going to trim a little bit of it off to protect the fuel line.



I started slowly removing just a little bit.



Then I took just a little more off.



Out comes them death wheel.





A little clean up.



All better now and I am still going to run the line through DEI ExoSleeve.

[syborg tt]

I am finally installing the FlexKore brake lines.



Old lines are coming out.