1968 Camaro Build - Third time's the charm

[Steve68]

I want to know what inner wheel wells did you use???

Looking at the wiring harness's do you have a harness coming out of each side of the firewall??? noticing the hole on the drivers side,

[CMillwheels]

Originally Posted by Steve68

I want to know what inner wheel wells did you use???

Looking at the wiring harness's do you have a harness coming out of each side of the firewall??? noticing the hole on the drivers side,

Hey Steve - the inner fender wells are Speedtech fiberglass. On the wiring, I have the body harness in the stock location and the engine harness is coming through the hole I installed on the driver’s side. The PCM is located under the dash and the engine fuse box is located on the drivers side core support. I had to completely rework the harness to make this work but I really wanted the PCM under the dash inside the car. Here’s a few more pics of the wiring and where I installed the PCM.

[camcojb]

Love the details.

[Ricochet]

Very cool build..

[Steve68]

Very Cool, I'm laying things out, My plans also, PCM inside and the harness thru the firewall,

How thick is the foam you have in the interior??

I'll look at the Speedtech site, always gathering ideas to implement on my car,