more pics...
one quick frame mod I pulled off this afternoon is a reinforcement for the idler arm. It always bugged me on these frames that the driver side has so much more strength by comparison where the steering box bolts up- shaped metal, the sleeves for the bolts, etc whereas the pass side just bolts up to a flat panel. no ribbing, no reinforcement, none. So I made an additional plate to weld up on the inside with a rib to help give it some lateral strength and plug welded it in.
More mods to come.
|
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
