Mind sharing what center air vents are being used in the dash ?
The center and side air vents are Porsche 911 993, when inverted the center air vent fits the curve of the 75-76 Nova dash pad. Later in the build we scrapped the center air vent for 2 of the side vents mounted just below the dash pad and above the ash tray
Last edited by colorado80439; 12-27-2022 at 07:36 AM.
The Following 4 Users Say Thank You to colorado80439 For This Useful Post:
Brakes and ducting: After significant research we chose AP Racing brakes offered by Essex parts in the US and is a UK based company that has been around since 1920 owned by Brembo S.p.A since 2000. I was discussing brakes with Tobin at Kore3 and he was telling me how impressed he was with the Radi-CAL caliper design. Part #: 13.01.10025 these are 6 piston caliper with 355mm x 72 mm disc front and Part #: 13.01.10059 are 4 piston caliper, 340mm x 28mm disc rear. These are kits offered by Essex parts for the C6 and use a C6 E-brake assembly offered seperately. We also use a brake air duct offered for the C6 and the Stielow method for ducting air through the frame rail. Thanks again to Tobin at Kore3 and Stielow for sharing his previous builds
Last edited by colorado80439; 12-30-2022 at 10:35 PM.
The Following 7 Users Say Thank You to colorado80439 For This Useful Post:
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
It's like a ball of yarn unwinding, that has no end... Author DKz Garage
Hybrid Mode
