My 67 Camaro at Sled Alley

[EVIL SS]

What ABS system are you using?

[Stielow]

Originally Posted by EVIL SS

What ABS system are you using?

It is a Delphi C6 Corvette 2006-2008 with a one off race calibration. It will work stock if you put in all the sensors but is not optimized for hi-Mu brake pads.

A more user friendly (not cheaper) is the Bosch system.

Mark


Sent from my iPhone using Tapatalk

[Steve68]

What line clamps are they using?

Nice and clean,

[srode1]

Originally Posted by Stielow

It is a Delphi C6 Corvette 2006-2008 with a one off race calibration. It will work stock if you put in all the sensors but is not optimized for hi-Mu brake pads

Sent from my iPhone using Tapatalk

can you say more about how the race calibration and how it's loaded / dialed in?

[Stielow]

Originally Posted by srode1

can you say more about how the race calibration and how it's loaded / dialed in?

It was developed for a “no ice mode” SCCA race cal. It is not commercially available. I have a very few flashed controllers that I use on my builds. I think I have 2 left.

There is a BMW Conti solution I have heard of. I have never tried it but I have seen people run it.

ABS is part of the issue. Good wheel speed sensors, pluming and wiring is the rest. ABS is not a cheap date and a lot of effort.

Mark


Sent from my iPhone using Tapatalk

[Stielow]

Originally Posted by Steve68

What line clamps are they using?

Nice and clean,

Custom modified Kugel clamps off memory. I’ll ask Matt for a photo.

Basically cut the hump off one and weld it on the other for a double line clamp.

Mark


Sent from my iPhone using Tapatalk

[Steve68]

ahh more custom trick parts, cool!