Transcona, the Dirty Old Cougar

[egoman]

150 Work that I am not sure I want to leave like it is???
https://lateral-g.net/forums/attachm...1&d=1703976465

[egoman]

151 Scraping seam sealer and paint as well as removing trim to make way for a few closeout pieces.
https://lateral-g.net/forums/attachm...1&d=1705277904

[egoman]

152 I built this bender a long time ago for making race car bodies. It’s been used, stored, and lost for 5 -10 years at a time. But it does a decent job and allows me to make some closeout panels for the trunk area.
https://lateral-g.net/forums/attachm...1&d=1707010173

[egoman]

Just some more pictures.
https://lateral-g.net/forums/attachm...1&d=1707010338

[egoman]

153 The reinforcing pieces for the sills are going in permanently today. There will be pain and there will be blood. The rockers need to go away for the exhaust system to run the way I want it. Well they need to go away because the only place I have for an exhaust is side-pipes. My decision of ride height and flat bottomed car dictated this from the start. I just didn’t realize it from the start!
https://lateral-g.net/forums/attachm...1&d=1708484482
Attached Images