Hobbs Camaro (Old Drag Car)

[CarlC]

Originally Posted by Stielow

We might have over achieved on making it quite. I did not think it was possible. But my wife did not hear me start the car and leave the neighborhood.

It will loud-up a bit after hammering on it a while. Supercharging speeds up the process so you might have to throttle-up more often ;-)

[Stielow]

Originally Posted by CarlC

It will loud-up a bit after hammering on it a while. Supercharging speeds up the process so you might have to throttle-up more often ;-)

I’m an old development engineer that is what I have done most of my life. This is part of the normal development process. We moved way off the recipe and it turned out different. No big deal. I’ll try another set of mufflers and if I don’t like them we will try another.

When I first built the 88 Blazer it had a mild cam in it. Everyone loved the loopy idle. I did not. I swapped it and love it.

It is a process and my tastes have shifted over the years. The car is fantastic and with a few small tweaks I’ll like it better.


Sent from my iPhone using Tapatalk

[WSSix]

What didn't you like about the power steering, Mark? I'm considering the Holley mid mount setup for my C10. It's just a cruiser and not a performer at all.

Glad you were able to get the car out this year and enjoy it some before the snow sets in. Enjoy the tweaking!

[Stielow]

Originally Posted by WSSix

What didn't you like about the power steering, Mark? I'm considering the Holley mid mount setup for my C10. It's just a cruiser and not a performer at all.

Glad you were able to get the car out this year and enjoy it some before the snow sets in. Enjoy the tweaking!

I have used the Holley mid-mount on a few builds with no issues, works great. The rumor is they switched the Holley power steering pump supplier to some Chinese knockoff. I ordered a Delphi GM pump from Turn One. We are installing that this week. I’ll let you know if that fixes the noise issue and the lack of assist at idle.


Sent from my iPhone using Tapatalk

[72Z/28]

Originally Posted by Stielow

I have used the Holley mid-mount on a few builds with no issues, works great. The rumor is they switched the Holley power steering pump supplier to some Chinese knockoff. I ordered a Delphi GM pump from Turn One. We are installing that this week. I’ll let you know if that fixes the noise issue and the lack of assist at idle.


Sent from my iPhone using Tapatalk

Mark, can you please share the part number for the Delphi GM pump? Thanks in advance.