Have you tried a gear set that's been REM polished? Just wondering if it's worth doing or if it's all hype. They claim lower temp, friction and noise.
Not to chime in on behalf of Mark, but I asked GearFX a while back about that - they said yes REM really lowers temps, but it would have no impact on noise.
We're putting the DSE FN988 in our current project (uses the 8.8 center section in 9" housing) but it won't be on the road for a year or two.
The Following User Says Thank You to 83hurstguy For This Useful Post:
Not to chime in on behalf of Mark, but I asked GearFX a while back about that - they said yes REM really lowers temps, but it would have no impact on noise.
We're putting the DSE FN988 in our current project (uses the 8.8 center section in 9" housing) but it won't be on the road for a year or two.
I think Charleys new Camaro has that 8.8 setup, should be done soon.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
