Help!!! Stance Chevelle 20 all around

[jay71velle]

Ok guys I'm running 20's all 4 corners started with 245/35/20 295/30/20 Toyo, swapped rear tires today to 295/35/20 pilot....currently I have cpp 2" drop springs in rear and cut one coil in front, not sure if I want to cut some more or run drop spindles in front....

[jay71velle]

295/30/20 in the rear

[gearheads78]

Not a big fan of 20's on a mid size car but if I was running that combo it needs about 1" more in back and 2-2.5" in front

[jay71velle]

Yea that's what I was thinking, I actually just dropped down from a 22 so I'm gong thru withdrawal....young guy but I'm trying to go in the right direction

[JB64CHEVELLE]

My vote would be to bring it down some more. I think you need to tuck the tire a bit in the wheelwell . I would come down at least 1.5".

[214Chevy]

I agree, it needs to come down about another inch in the rear. I have a 72 Chevelle and run 20's on all for corners. Here are a few pics of my ride height. I wanted the ledge of the fender to go past the top of the wheel a little bit. Me personally, I like the 20 on our cars....at least a 19" anyway. I think our cars are too big for 17's and 18's.

[jay71velle]

Hey thanks guys...it will be coming down an inch in the rear for sure...and maybe 2 in the front...@ Marcus im keeping my eye on your setup, I only hope part II of my build could be as good as yours