Rogue Status '69 Camaro for Rob Dyrdek!

[ArisESQ]

Originally Posted by Vince@MSperfab

that rear has to be narrowed with that much dish.

I have an 18x10 with 5.75 inches back spacing and I have close to that much or just as much lip on the rear wheels. Ill snap a pic for you later. I think its possible for it to have the stock axle width.

either way, I just minitubbed my car, so now I'm trying to figure out how much to wide/modify the wheels to get them to fit right.

[ArisESQ]

Originally Posted by 68protouring454

stock width rear with 12 inch wide rim will be 8-1/4 to 8-1/2 bs on a first gen, better to go deeper then shim out if need be

Thank you!

[AllSpeedAndy]

The rear set up on this car is,

19 x 11 with 6" of bs.
housing is 57 1/2", rotor face to rotor face.
With DSE mini tubs. and the outer wheel house squared to the quarter for
travel clearance with the air ride.

[Vince@Meanstreets]

Originally Posted by ill steez

I have an 18x10 with 5.75 inches back spacing and I have close to that much or just as much lip on the rear wheels. Ill snap a pic for you later. I think its possible for it to have the stock axle width.

either way, I just minitubbed my car, so now I'm trying to figure out how much to wide/modify the wheels to get them to fit right.

On the 69's I have done they required a narrowed rear to get anything under 7" to fit right.

My 69 would need 8 3/8" to fit but it doesn't look right.

If you want I can narrow that rear end for you so your 5 3/4" will fit. Sorry, what year is your car?

Sorry for the highjack Andy but do you have a web site or build page we can peep? Love to see the fabrication work up close.

Also is this build going to be featured in season 3? Please tell Rob and BB to hop in and say hello. I promise we won't mob him too bad.

[bucks69]

i didnt see anywhere but what is ride height at front/rear rocker? TIA
Great build and looks mighty fine...

[AllSpeedAndy]

Originally Posted by bucks69

i didnt see anywhere but what is ride height at front/rear rocker? TIA
Great build and looks mighty fine...

Rear of rocker is at 7 1/4" 's
front of rocker is at 6" 's

our web site is in my signiture... www.AllSpeedPerformance.com

[AllSpeedAndy]

Originally Posted by Vince@MSperfab

On the 69's I have done they required a narrowed rear to get anything under 7" to fit right.

My 69 would need 8 3/8" to fit but it doesn't look right.

If you want I can narrow that rear end for you so your 5 3/4" will fit. Sorry, what year is your car?

Sorry for the highjack Andy but do you have a web site or build page we can peep? Love to see the fabrication work up close.

Also is this build going to be featured in season 3? Please tell Rob and BB to hop in and say hello. I promise we won't mob him too bad.

No high jack...it's all good....

We're hoping to fit this in to season 3, we're going to show up and film,
Rob sead he got the crew's ready and waiting on us. Looking like mid November and we'll be there.

[AllSpeedAndy]

Well this thing is off to final paint...hopefully have some pics early this week of the body all together. should be done from paint in a week or so....then we'll get to see some serious progress being made....

I'll keep ya posted.

[jwillia2]

i wonder if he is going to let the mini pony ride in the 69..????

[slownova]

i think the rims are awesome. everything rob has is awesome. i think the cars awesome, and im jealous. kick ass and keep up the awesome build!