Dynatech headers on 69 camaro 383 stroker - Lateral-g Forums

vicious69 · #1 03-12-2011, 08:41 PM

Anyone use Dynatech Headers on 69 camaro with Gen 1 small block? Im running a 383 stroker and looking at 1 3/4-1 7/8 stepped headers but dont know if they fit good and clear power steering box? Or should i go with the 1 5/8-1 3/4 stepped set?

TheCntrion · #2 03-13-2011, 08:02 PM

It would be tough to give good advice without knowing your cylinder head and cam combo

vicious69 · #3 03-14-2011, 12:42 PM

Im running stock 70 camaro LT1 heads 64cc with 2.02/1.60 valves and mild porting. Flat top 4 valve relief pistons. Probably 10.5-11.0 compression. My cam is a comp cams XE274H. Im also running a performer RPM air gap intake.
Thanks

64pontiac · #4 03-14-2011, 06:48 PM

They fit great in a Nova, I mean NO dings or anything special needed, they clear everything but you need plug wires with a straight boot and the braided protector sleeves to be safe on angle plug heads.

Nova should be identical to the camaro subframe.

I also know their LS1 camaro headers fit awesome too. Best bang for the buck as far as quality and price.

Let me see if I can find a pic

Wayne S · #5 03-16-2011, 06:06 PM

Since you're at about 400-425hp, definitely go with the smaller headers. You don't need the big tube headers, they'll take away too much bottom end with little to no effect up top. As for how the Dynatechs fit? I'm not sure, but I'd like to change out my Hooker Super Comps for a set. They sure look nice.

6D9 · #6 04-06-2011, 10:04 PM

Quote:

Originally Posted by Wayne S

Since you're at about 400-425hp, definitely go with the smaller headers. You don't need the big tube headers, they'll take away too much bottom end with little to no effect up top. As for how the Dynatechs fit? I'm not sure, but I'd like to change out my Hooker Super Comps for a set. They sure look nice.

X2!!!!!!