PSI Conversions LS Harness - Lateral-g Forums

ItDoRun · #1 09-27-2013, 08:09 AM

Does anyone have any photos of a first gen Camaro with the PSI harness? I'm curious how the harness lays in the engine compartment and how clean it looks. I need to get my harness ordered next week.

Thanks,

Ron in SoCal · #2 09-27-2013, 08:23 AM

Chris I used PSI and would again. Take a look in my thread (tail end) and you'll see some pics. We did re-wrap it in the engine comaprtment, but no other mods.

**Swain** · #3 09-27-2013, 11:21 AM

I have the same deal also. I would love to see some pictures.

rickpaw · #4 09-27-2013, 12:15 PM

Here's a picture of PSI harness I used in my swap. I put the ECU behind the pass head lights and ran the main harness from the ECU inside the fender.

ItDoRun · #5 09-27-2013, 12:34 PM

No picture

Quote:

Originally Posted by rickpaw

Here's a picture of PSI harness I used in my swap. I put the ECU behind the pass head lights and ran the main harness from the ECU inside the fender.

Bsinclair · #6 09-27-2013, 06:16 PM

i used a harness made by modern vintage and i'm really happy with how its made.. I mounted my ecu inside the car using a ironworks mount..

hud697 · #7 10-07-2013, 07:24 AM

I used the harness from SSP on my dad's '55, i really liked the look of it better than my PSI. It had braided loom on the entire harness

jeremy30thz · #8 10-12-2013, 03:26 PM

Quote:

Originally Posted by Bsinclair

i used a harness made by modern vintage and i'm really happy with how its made.. I mounted my ecu inside the car using a ironworks mount..

Looks good man, I will have a very similar setup if I can ever get started on it

mikeextrafast · #9 10-17-2013, 05:44 PM

what location are you guys installing the ecu ?