Build Pics of Nre's TT LSx's

[TOM NELSON]

Originally Posted by Bowtieracing

Anything new on the build up and intake?

we have finished the final article on the casting and it is being tooled for machining should be around 3 to 4 weeks and i will post more

[TOM NELSON]

Originally Posted by XTRMEASURES

i love it, what something like that cost?

keep the pics comming........

Cost is yet to be determined but it i think many will be pleased with what i will be able to sell it for.

[TOM NELSON]

Originally Posted by T_Raven

Just read through this thread. Really nice stuff.

I was wondering what rags you use to wipe down the cylinders. I went to Wyotech and they taught us to use ATF with "lint free" white rags but I don't know what kind of rags they were or where to get them.

I usually use a brawny white paper towel that way i can see when the cylinder wall is clean we use laquer thinner to clean them multiple rags per cylinder with heavy presure from your fingers .I don't use atf anymore we used to do that i use 30weight mineral based now

[Junkie]

I'll be calling you guys to price some stuff out this coming week

[XTRMEASURES]

.....bump.....

[Bowtieracing]

Originally Posted by TOM NELSON

we have finished the final article on the casting and it is being tooled for machining should be around 3 to 4 weeks and i will post more

Was there talk about OHC heads ??

[Diognes56]

David

[EddDeeEye]

That intake is killer! Thanks so much for sharing the level of work that goes into building one of your masterpieces!

[Bowtieracing]

Originally Posted by TOM NELSON

we have finished the final article on the casting and it is being tooled for machining should be around 3 to 4 weeks and i will post more

Anything?

[camcojb]

He has not posted here in almost three years and his pictures no longer show up.