The OneLapCamaro complete build thread

[James OLC]

And the rest is coming together as well

[James OLC]

Axles for the OneLapCamaro project arrived yesterday. Mark Williams went above and beyond helping us with a special request:

[68protouring454]

traction control uh??? killer

[James OLC]

Yep, we're working on integrating an adjustable electronic traction control system with the LS7. Our biggest stumbing block had been the reluctors for the rear wheels. Bret and the guys at Mark Williams were the only guys I found who were interested in pursuing a solution for us.

[James OLC]

We had a chance to build the exhaust for the OneLapCamaro project last week. Unlimited Performance in Calgary bent up some three inch out of the ATS Road Race Headers into a X-pipe and then over the Lateral Dynamics 3-link and out. While we're finishing the bodywork we'll clean up the welds and ceramic-coat it.

[awr68]

Looks good! What else needs done before the teardown for body/paint?

[Mean 69]

That looks terrific, Jimmy! Tailpipes are 3" also? I love the way they jut out to the quarters, going to look very cool and different.

Mark

[James OLC]

Originally Posted by awr68

Looks good! What else needs done before the teardown for body/paint?

Where to start...

• Mount shocks and remote reservoirs with plumbing
• Plumb diff cooler with remote pump
• Fit axles and brakes, plumb brake lines
• Mock up Toyo R888's, trim quarter as needed and order wheels
• Run sensors for traction control
• Plumb fuel and return lines
• Run battery cable to starter
• Finish running lines for A/C
• Cut tunnel for shifter
• Final fit for oil cooler, trans cooler, and ps cooler
• and a couple of bits and pieces here and there before blowing it apart

we're hoping to have the underside done and in paint with the interior and roll cage first week in December.

Thanks for reminding me of the list, it's been like twelve hours since I last stressed about it - lol.

[olds87]

The car is coming together nicely.

[Sales@Dutchboys]

WOW!

Paul