Need custom stainless brake lines

[mike343sharpstk]

Looking for a company to work with on a set of custom rear stainless-braided flexible brake lines.

I am replacing my stock rear axle with a Moser 9 and using their economy rear disc brakes. I’ll need to replace all the lines from the T-fitting on the axle to the calipers.

[Chevy Kid]

Contact Tobin at Kore3. He can hook you up!

[dontlifttoshift]

I don't know where you are in Wisconsin but there is a guy across the street that can crimp braided brake hoses in size and configuration you want. It's all brakequip stuff, pressure tested, and DOT approved. Very reasonably priced. We use him all the time.

[mike343sharpstk]

Two options, thanks!

I saw that Kor3 was a supporting vendor, I like that.

Donny, I'm about an hour north of Milwaukee, If I can email or phone a local/regional place the details of what I'm looking for I'd like to at least give them a call, can you get me more info, or I can work through your shop?

[dontlifttoshift]

Off of BrakeQuips dealer finder

Hartland Service, Inc.

22.7 miles

400 E. Industrial Drive Hartland, WI 53029 USA 262 367 4234



Lake County Hose & Equipment, Inc.

42.2 miles

12726 W. Wadsworth Road Beach Park, IL 60087 USA (847) 263-1880

Lake County Hose is who we deal with but the guys in Hartland may be easier for you to deal with. BrakeQuips product line is all online so you can figure out what you need and have them assemble and crimp it. Lake County Hose is so close I just get the fittings I need and make up a "hose assembly" with vacuum line. This allows us to build them with 90s or 45s on both ends as needed.

[mike343sharpstk]

I finally got the time to do pre-assemble my new Moser 9 with the brake kit and get the hard lines fabricated and in place.
Yesterday I figured out what I need as far as stainless braided lines and threw together a drawing.

I contacted Hartland Service, Inc. this morning, and they are building what I need now, I should have it at my front door by mid-week.