...

Go Back   Lateral-g Forums > Technical Discussions > LSX Conversions
Reload this Page Fuel level with Holley dash
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 04-03-2021, 01:30 AM
Jr's Avatar
Jr Jr is offline
Senior Member
  
Join Date: Sep 2005
Location: so cal
Posts: 1,772
Thanks: 0
Thanked 0 Times in 0 Posts
Default Fuel level with Holley dash
Hello,

Does anyone know which parts/wires I need to install a fuel level gauge using my Holley dash? I have a ricks tank with the tube level.

Thanks
Reply With Quote
  #2  
Old 04-03-2021, 02:08 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,905
Thanks: 5,583
Thanked 1,597 Times in 717 Posts
Default
Not sure which dash you have, but the standard 7" uses a tan wire for the fuel sender. It looks like the dash comes with everything needed to hook up to the Holley EFI system and display what's happening there. But for additional inputs like fuel level you may need to get a separate I/O harness from Holley to have the wiring needed, not sure if it comes with the dash itself.

https://documents.holley.com/199r10954rev2.pdf
Attached Images
 
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
The Following User Says Thank You to camcojb For This Useful Post:
zz430droptop67rs (04-03-2021)
  #3  
Old 04-03-2021, 06:35 PM
cjfirstgen's Avatar
cjfirstgen cjfirstgen is offline
Senior Member
  
Join Date: Sep 2012
Posts: 489
Thanks: 29
Thanked 401 Times in 157 Posts
Default
What he said^^^^ separate input harness needed.

__________________
Project "Mercury Rising" '69 Camaro : https://lateral-g.net/forums/showthread.php4?t=41460
Reply With Quote
  #4  
Old 04-03-2021, 06:40 PM
Jr's Avatar
Jr Jr is offline
Senior Member
  
Join Date: Sep 2005
Location: so cal
Posts: 1,772
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Yes, I have the 7” dash. Which input harness do I need? Does anyone have a link? I tried searching the Holley site...
Reply With Quote
  #5  
Old 04-03-2021, 06:44 PM
cjfirstgen's Avatar
cjfirstgen cjfirstgen is offline
Senior Member
  
Join Date: Sep 2012
Posts: 489
Thanks: 29
Thanked 401 Times in 157 Posts
Default
Quote:
Originally Posted by Jr View Post
Yes, I have the 7” dash. Which input harness do I need? Does anyone have a link? I tried searching the Holley site...
https://www.holley.com/products/gaug.../parts/558-432

And one of these then terminate what wires you need into it. Don't forget pins if needed.

https://www.te.com/usa-en/product-14...mpaignId=37423
__________________
Project "Mercury Rising" '69 Camaro : https://lateral-g.net/forums/showthread.php4?t=41460
Last edited by cjfirstgen; 04-03-2021 at 06:49 PM.
Reply With Quote
The Following User Says Thank You to cjfirstgen For This Useful Post:
camcojb (04-03-2021)
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:15 AM.
Contact Us - Lateral-g.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net