Emergency Brake - Electric

[MtotheIKEo]

Caliper is mounted. It works perfectly with the one-touch window controller.

[69Toronto]

Originally Posted by MtotheIKEo

Caliper is mounted. It works perfectly with the one-touch window controller.

Im just about to finish my tesla install, I used a module to control the caliper similar to pantera's

I have installed only 1 tesla caliper....do you think this enough to hold the car from rolling?

[69Toronto]

Originally Posted by MtotheIKEo

Caliper is mounted. It works perfectly with the one-touch window controller.

Im just about to finish my tesla install, I used a module to control the caliper similar to pantera's

I have installed only 1 tesla caliper....do you think this enough to hold the car from rolling?

[MtotheIKEo]

Originally Posted by 69Toronto

Im just about to finish my tesla install, I used a module to control the caliper similar to pantera's

I have installed only 1 tesla caliper....do you think this enough to hold the car from rolling?

1 is enough to hold my car firmly on a steep driveway. It very noticeable if I leave it engaged and try to drive away.

Did you use the Pantera controller or something else?

[69Toronto]

Originally Posted by MtotheIKEo

1 is enough to hold my car firmly on a steep driveway. It very noticeable if I leave it engaged and try to drive away.

Did you use the Pantera controller or something else?

thanks good to know...cant wait to see mine work
(car still paint)
I did not use the pantera controller, I found an actuator controller or 99.00 and some generic red/green button
once i get my car back I can take a look and post the name of the manufacturer

[Perry Mitchell]

I was hoping to get more info on the Tesla parking brake conversion for my 67 Camaro. What is the caliper made of? I'm hoping aluminum so I can remove the Tesla logo and get them anodized to match my Wilwood calipers. I also need more info about the recall that applies to the calipers. Can I fix them myself? I am trying to find a caliper cheap enough to play with but they are all around $100 and up per each. I also need to figure out how to mount them.