Procharger LS Transplant kit in 68 camaro with AC and Speedtech Subframe
I have a 68 camaro equipped with LS6, Speedtech Subframe, Corvette accessories drive and AC compressor is mounted on the passenger side via bracket from Kwik Performance.
I am interested in installing a procharger kit and wondering if anyone has done this install a first gen with A/C mounted on top, passenger with Speedtech Subframe. I have looked up in google, unfortunatelly could not have any luck finding pics or at least or anybody did this install with a similar set up.
Will appreciate receiving some input on that.
Thanks!
Vortech has a few kits that will work. We just did the install of the Gen 5 Camaro kit in the Speedtech C-10 chassis. And the CTS-v kit is different then the GEN 5 camaro. I have an extra CTS-V system on the shelf as the kits looks very similar.
The Procharger stuff we have done in the past was pretty wide and low and makes it very tough.
Vortech has a few kits that will work. We just did the install of the Gen 5 Camaro kit in the Speedtech C-10 chassis. And the CTS-v kit is different then the GEN 5 camaro. I have an extra CTS-V system on the shelf as the kits looks very similar.
The Procharger stuff we have done in the past was pretty wide and low and makes it very tough.
Thanks for the input. Do you have by any chance photos to share for the Vortech install on the Speedtech C-10 chassis.
If you look at the Photobucket thread you will see why I didn't post the pics. Photobucket sucks and I don't post in forums much any more. And the project is not far enough along to make the website yet so just email me and I can send a few pics back.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Procharger LS Transplant kit in 68 camaro with AC and Speedtech Subframe
Linear Mode
