Had idler pulley seize on my 2019 LT4 which took out the the two drive belts which pulled the wiring out of the Mass air flow plug. What are my options? Looking at the plug it is not obvious how to reterminate the wires. I see extender harnesses which I could splice in but not ideal.
Not sure exactly what you're asking. Looks like they use a metripack connector, probably 150 series. The wire order I find is like the pic below.
Thx, but mine has 7 wires. Connector with a red locking tab. I know the coloured wire positions. Have figured out how to pull off the connector retainer but not how to get the individual wire pins out.
Last edited by vet57air; 08-13-2023 at 11:18 AM.
Reason: add pic
Thx, but mine has 7 wires. Connector with a red locking tab. I know the coloured wire positions. Have figured out how to pull off the connector retainer but not how to get the individual wire pins out.Attachment 80495
__________________
Instagram @projectgattago
I offer remote Holley EFI tuning.
I deliver what EFI promises.
Please get in touch if I can be of service. My YouTube Channel
The Following 3 Users Say Thank You to andrewb70 For This Useful Post:
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
LT4 MAF wiring
Linear Mode
