Hobbs Camaro (Old Drag Car)

[PTAddict]

Originally Posted by jeff71

Thanks for the respose Mark.

I'm not finding anything for C6 Z06 from Ferodo except these.....

Ferodo DS2500 Brake Pads - Padlets


HP1000 possibly discontinued?

Pad choices for C6 Z06 are somewhat limited because of the funky padlet design for those calipers.

The DS2500 is a street plus moderate track pad. I used them on my C7 vette for a couple of track days, they worked OK. They were quiet on the street, but like all performance pads were more dusty than the OEM pads.

If you're a newer track driver doing autoX or a couple of HPDE per year on street tires, the DS2500 may work OK. More experienced drivers running a car like the Z06 on multiple track days a year, and/or with stickier tires, typically swap to a specific track pad with matching rotors on track days. Like Mark said, it depends.

You might look in the autoX and road racing section of the Corvette forum: https://www.corvetteforum.com/forums...roadracing-23/ Lots of experience there.

[Stielow]

Sent from my iPhone using Tapatalk

[Stielow]

The extra connector is to add the missing sensor so you can do a Tech 2 ABS bleed. A Tech 2 ABS bleed is where you use a GM diagnostic tool to activate the valves in the ABS module to get the air out.





Sent from my iPhone using Tapatalk

[Stielow]

The car was repainted in the 1980s and had a ton of overspray in the door jams. Because the doors have never been off the car we just cleaned it up.








Sent from my iPhone using Tapatalk

[Stielow]

Sent from my iPhone using Tapatalk

[130fe]

Mark, you mentioned the C6 brakes (assuming base) fit in the Forgeline OE wheels. Do you know if they fit in 18” size ones?

[ScotI]

Originally Posted by 130fe

Mark, you mentioned the C6 brakes (assuming base) fit in the Forgeline OE wheels. Do you know if they fit in 18” size ones?

I have a c6 z51/j55 brake package (C6 floating 2-piston caliper; 13.4" rotor) that fit within 18" Rocket Racing 'Attack' wheels.

[214Chevy]

Looking great!!

[Stielow]

Front sheet metal is back on. Starting to look like a Camaro again.


Sent from my iPhone using Tapatalk

[Stielow]

Some interior bits coming together. Sinking the speaker in the package tray is some work but it really stiffens up the panel and make the package tray look great.








Sent from my iPhone using Tapatalk