69 Camaro at Best of Show

[Matt@BOS]

Originally Posted by Greggggg

You might be the first to do that Cris....

G.

Might? or might not be the first? I can think of someone whose name starts with an R and ends with an Upp, who might have taught Cris about "breaking" parts in.

[Jr]

Matt,

Are you going to post before and after pics of the fenders?

[Rick D]

Originally Posted by DJW32

Matt,

Are you going to post before and after pics of the fenders?

Matt are you going to post ANY pictures

[Matt@BOS]

Originally Posted by Rick D

Matt are you going to post ANY pictures

I will post some pictures. They might not be good pictures, but then again you guys don't seem terribly picky. Everyone seems happy when Dave and Ron post pictures of -AN fittings or brackets.

I picked up the parts yesterday. They look pretty good. They don't have a gel coat with a slick shiny surface on them, but the lines are relatively crisp and fairly straight. All of the holes are drilled, or cut out. It will be interesting to see how they fit. I probably need to either make, modify or add a little structure to the area where the inner fender meets up between 10 and 2 o'clock.

Matt

[Flash68]

Originally Posted by Matt.A

Everyone seems happy when Dave and Ron post pictures of -AN fittings or brackets.



Matt

Hey, I retired from that....

Ron? Not so much.

Oh... and I hear if you need to borrow any of my junker cars for a quick errand, I still better have you sign a waiver.

[Matt@BOS]

Originally Posted by Flash68

Hey, I retired from that....

Ron? Not so much.

Oh... and I hear if you need to borrow any of my junker cars for a quick errand, I still better have you sign a waiver.

Man, you are Captain off topic. We were discussing me using Dick's truck to teach that fence pole a lesson in the thread about the fastback build. You might actually want me to borrow your junkers. I stopped at the bank on my way back to the shop and just handed Dick the money when I got back.

[Ron in SoCal]

Originally Posted by Flash68

Hey, I retired from that....

Ron? Not so much.

Dave, Dave, Dave...

The reason you've retired from that is you've run out email images of someone else's parts or graphs

[FETorino]

New wide carbon fenders and of course with that comes new wheel hoops. So what are you doing with your wheels Matt? Just going with new outer hoops to gain some width or something else?

Oh and I apologize in advance for actually posting on topic in this thread. It seems that isn't normally allowed.

[Matt@BOS]

Originally Posted by FETorino

New wide carbon fenders and of course with that comes new wheel hoops. So what are you doing with your wheels Matt? Just going with new outer hoops to gain some width or something else?

Oh and I apologize in advance for actually posting on topic in this thread. It seems that isn't normally allowed.

I was just planning on re-hooping the front wheels. It is a lot cheaper than getting a new set of wheels. I do hope that one day there is someone like Ron or Steve Rupp with a DSE subframe to flood the classifieds with all kinds of wheels.

[FETorino]

Originally Posted by Matt.A

I was just planning on re-hooping the front wheels. It is a lot cheaper than getting a new set of wheels. I do hope that one day there is someone like Ron or Steve Rupp with a DSE subframe to flood the classifieds with all kinds of wheels.

Yea I went Chevy bolt pattern on my hubs just so I could get one of Ron's extra sets.