IRONWORKS - 1967 Camaro with LT4, Forgeline's, Wilwood, Lots of new custom parts

[WILWAXU]

It's been fun watching this one come together. Great work!

[CamaroAJ]

Originally Posted by ironworks

We actually did not remove the cowl or fresh air vents from this car. Its a pretty standard Rain Gear wiper system install.

I meant since the rain gear is fitted from inside the car as the upper cowl has close out panels welded in, how did you keep water from running into the interior of the car? Looks like you made black plates that may have a gasket sandwiched in between?

[ironworks]

Originally Posted by CamaroAJ

I meant since the rain gear is fitted from inside the car as the upper cowl has close out panels welded in, how did you keep water from running into the interior of the car? Looks like you made black plates that may have a gasket sandwiched in between?

We smoothed the cowl. I forget we had to remove the air passage to make enough room for the EPS, and ECU and all the other crap under the dash.

http://www.ironworksspeedandkustom.c...rod/prd510.htm

[JON Q]

Since the LT4 uses an electric power steering, how did you get it to work? Or did you use a hydraulic based version?

[ironworks]

Originally Posted by SIXX

Since the LT4 uses an electric power steering, how did you get it to work? Or did you use a hydraulic based version?

We went with electric power steering that was from Unisteer that used an ididit column.

[JON Q]

Originally Posted by ironworks

We went with electric power steering that was from Unisteer that used an ididit column.

Thank you!